Wooden Plate Rack Suggested Mounting Instructions
Measure your unit and mark out the positon on your wall, where you would like it to go.
Get some help and offer the unit up to the wall, check for clearance and ease of access.
Attach the two L Brace brackets to the top of the unit, using suitable fixings.
Drill through the lower mug peg bar in four appropriately spaced locations that best support your unit (note smaller units may only require 3 mounts).
Get some help and offer the unit up to the wall. Position the unit and mark all holes ready for drilling (a spirit level will help to get the unit level).
Using the correct PPE and taking the necessary safety precautions. Drill all holes, following the instructions from the fixing manufacturer / supplier.
Get some help and offer the unit up to the wall. Position the unit and secure to the wall using your fixings (a spirit level will help to get the unit level).
Check unit is secure and firmly attached to the wall, before adding any items of crockery.
Always seek the advice of a professional or other qualified person before mounting your wooden plate rack on your wall.
RM Wooden Plate Racks take NO responsibility for incorrect or inadequate mounting, or the unit falling of your wall.